Feel free to reach out to us!
Find quick answers to common questions
Press & drag to view
Suitable for municipal sewage stations and industrial wastewater, this high-output pump manages untreated effluents and raw sewage carrying substantial solid matters. The unit is optimized for deep collection sumps requiring continuous-duty service under complete submersion. It manages liquids with temperatures between 0 and 40°C carrying problematic suspended solids.
Maximum hydraulic output reaches a total head of 26 m and a maximum flow rate of 18000 L/Min. Operating on a 415V three-phase supply, the 55 kW motor draws a rated current of 110 Amps at 50Hz. These performance specifications provide the hydraulic delivery for 300 mm discharge bore networks.
A 6-pole dry-type induction motor provides power to the hydraulic assembly with a synchronous speed of 1000 min?¹. A water jacket around the motor frame allows a portion of the pumped liquid to cool the motor during continuous operation. The hydraulic configuration features a shrouded two-channel impeller for solid-handling design with a 90 mm solids passage.
Mechanical assembly utilizes a Gray Cast Iron JIS FC250 pump body and high-durability 420 stainless steel shaft. Standard installation for this SKU is free-standing. A guide rail fitting version is available under model code TO300BZ655, allowing the pump to be connected or disconnected from the piping easily.
FEATURES
- Equipped with a water jacket around the motor frame where a portion of the pumped liquid cools the motor during operation.
- Shrouded two-channel impeller for solid-handling design, dynamically balanced.
- 90 mm solids passage for moving raw sewage and water carrying solid matters.
- Upper permanently lubricated deep-groove double-shielded C3 ball bearing ensures motor shaft stability.
- Lower duplex angular contact ball bearing mounted back-to-back for mechanical stability.
- Double-face mechanical seal located in oil chamber where both faces run in a clean lubricating environment.
- Tsurumi Oil Lifter forcibly supplies lubricating oil to the mechanical seal even when the lubricant level falls below the rated volume.
- Watertight cable entry featuring an anti-wicking block prevents moisture migration through damaged power leads.
IMPORTANT: Bulk freight charges apply. Please contact us for a freight quote before ordering.
FAQs
General Product FAQs
1. How do I choose the right pump for my setup?
Selecting the correct pump depends on your required flow (L/min), total head (vertical lift + friction loss), and power source. If you're unsure, contact our team and we’ll size the right system for you.
2. Do you offer support with system design or setup?
Yes — we provide expert advice to help you choose, install, and optimise your pump system. Whether it's a simple setup or a custom solution, we’re here to help.
3. Do you offer complete pump solutions or just products?
We don’t just sell pumps — we provide complete solutions. From accessories and control systems to full packaged setups, we can supply everything required to get your system running efficiently.
Shipping & Availability
1. Do you offer Australia-wide shipping?
Yes — we ship across Australia. Bulk or oversized orders may incur additional freight charges otherwise we offer free shipping over $100*
2. How long does delivery take?
Orders are typically shipped within 1–2 business days, with delivery taking approximately 2–7 days depending on your location.
3. What courier or freight companies do you use?
We work with a range of trusted carriers including Australia Post, StarTrack, TNT, and other national freight providers depending on the size and location of your order. This allows us to ensure fast, reliable delivery across Australia, including regional and remote areas.
Warranty & Support
1. Do your pumps come with a warranty?
Yes — all products are backed by manufacturer warranties. Warranty periods vary depending on the brand and product type.
2. What support do you offer after purchase?
We provide ongoing support including:
- Installation advice
- Troubleshooting
- Spare parts supply
- System upgrades
3. What is the warranty process if something goes wrong?
If you experience an issue, simply contact our team with your order details and a description of the problem. We’ll guide you through troubleshooting and, if required, arrange repair, replacement, or manufacturer assessment in line with warranty terms.
Why choose Foundation Pumps?
1. Why choose Foundation Pumps over other suppliers?
We focus on supplying proven, high-quality pump solutions backed by real industry knowledge. Unlike general resellers, we understand how these systems perform in the field and provide honest, practical advice to ensure you get the right solution the first time.
2. Do you offer expert advice before and after purchase?
Yes — we support you at every stage, from selecting the right pump through to installation and ongoing use. Our team is available to assist with sizing, troubleshooting, and system optimisation whenever you need it.
3. Do you stock trusted brands and quality products?
We carefully select and supply pumps from reputable manufacturers known for reliability and performance. Our range includes both industry-leading brands and high-value alternatives that meet Australian standards and conditions.
Can’t find your answer?
Recently viewed
Last seen items
Search
You May Like
- Choosing a selection results in a full page refresh.
- Opens in a new window.