Feel free to reach out to us!
Find quick answers to common questions
Press & drag to view
Suitable for stormwater pumping, municipal drainage, and large-scale industrial wastewater, this high-head model manages raw sewage containing solid matters. It is intended for complete submersion and continuous-duty service in large-scale municipal facilities. The construction handles effluents in liquid temperatures ranging from 0 to 40°C.
Rated performance reaches a maximum total head of 13 m and a maximum flow rate of 16000 L/Min at 50Hz. Powered by a 22 kW three-phase motor drawing a rated current of 47 Amps on a 415V supply, the pump provides the hydraulic output for 350 mm discharge bores. Electrical activation is managed by the Star-Delta starting method.
Mechanical delivery is provided by a 6-pole dry-type induction motor with a synchronous speed of 1000 min?¹. A shrouded two-channel impeller for solid-handling design is utilized, facilitating a maximum solids passage of 90 mm. This hydraulic configuration is specifically designed for 350 mm discharge systems requiring vertical fluid movement.
Structural components consist of a Gray Cast Iron JIS FC250 pump casing and 420 stainless steel motor shaft. Standard supply for this SKU is free-standing with an integrated base stand. A guide rail fitting version is available under model code TO350BZ622H, which allows the pump to be connected or disconnected easily by hoisting or lowering the unit.
FEATURES
- Shrouded two-channel impeller for solid-handling design, dynamically balanced.
- Maximum solids passage of 90 mm for sewage and water carrying solid matters.
- Double-face mechanical seal located in oil chamber where both upper and lower seal faces run in a clean environment.
- Tsurumi Oil Lifter forcibly supplies lubricating oil to the mechanical seal even if lubricant falls below the rated volume.
- Integrated pressure relief port protects the mechanical seal against excessive pressure and draws abrasive grit away.
- Miniature thermal protectors embedded in each winding of the motor signal the control panel to shut off power if excessive heat builds up.
- Watertight cable entry featuring a molded anti-wicking block to stop moisture from migrating into the motor housing.
- IP68 degree of protection for functional reliability in fully submerged industrial and municipal environments.
FAQs
General Product FAQs
1. How do I choose the right pump for my setup?
Selecting the correct pump depends on your required flow (L/min), total head (vertical lift + friction loss), and power source. If you're unsure, contact our team and we’ll size the right system for you.
2. Do you offer support with system design or setup?
Yes — we provide expert advice to help you choose, install, and optimise your pump system. Whether it's a simple setup or a custom solution, we’re here to help.
3. Do you offer complete pump solutions or just products?
We don’t just sell pumps — we provide complete solutions. From accessories and control systems to full packaged setups, we can supply everything required to get your system running efficiently.
Shipping & Availability
1. Do you offer Australia-wide shipping?
Yes — we ship across Australia. Bulk or oversized orders may incur additional freight charges otherwise we offer free shipping over $100*
2. How long does delivery take?
Orders are typically shipped within 1–2 business days, with delivery taking approximately 2–7 days depending on your location.
3. What courier or freight companies do you use?
We work with a range of trusted carriers including Australia Post, StarTrack, TNT, and other national freight providers depending on the size and location of your order. This allows us to ensure fast, reliable delivery across Australia, including regional and remote areas.
Warranty & Support
1. Do your pumps come with a warranty?
Yes — all products are backed by manufacturer warranties. Warranty periods vary depending on the brand and product type.
2. What support do you offer after purchase?
We provide ongoing support including:
- Installation advice
- Troubleshooting
- Spare parts supply
- System upgrades
3. What is the warranty process if something goes wrong?
If you experience an issue, simply contact our team with your order details and a description of the problem. We’ll guide you through troubleshooting and, if required, arrange repair, replacement, or manufacturer assessment in line with warranty terms.
Why choose Foundation Pumps?
1. Why choose Foundation Pumps over other suppliers?
We focus on supplying proven, high-quality pump solutions backed by real industry knowledge. Unlike general resellers, we understand how these systems perform in the field and provide honest, practical advice to ensure you get the right solution the first time.
2. Do you offer expert advice before and after purchase?
Yes — we support you at every stage, from selecting the right pump through to installation and ongoing use. Our team is available to assist with sizing, troubleshooting, and system optimisation whenever you need it.
3. Do you stock trusted brands and quality products?
We carefully select and supply pumps from reputable manufacturers known for reliability and performance. Our range includes both industry-leading brands and high-value alternatives that meet Australian standards and conditions.
Can’t find your answer?
Recently viewed
Last seen items
Search
You May Like
- Choosing a selection results in a full page refresh.
- Opens in a new window.