Feel free to reach out to us!
Find quick answers to common questions
Press & drag to view
This compact submersible drainage pump is developed for pumping storm water; wastewater; and rainwater carrying small solid particles from underground sumps. Utilizing a multi-vane hydraulic configuration; it easily transports clear or light effluent to distant locations or municipal lines. It is suitable for underground rainwater tanks; municipal treatment facilities; and measuring tanks.
The continuous-duty dry motor runs on a 415 V three-phase supply and outputs 0.75 kW while drawing a rated current of 2.0 Amps. Based on the manufacturer's performance curve; this pump achieves a maximum total head of approximately 15.2 m and a maximum capacity of approximately 330 L/Min. The unit operates with direct on line starting at a speed of 3000 min-1.
Built with a semi-open multi-vane impeller; the hydraulic design handles soft solids up to 11mm in diameter without clogging. The dual mechanical shaft seals are located within an oil chamber and incorporate ceramic-to-carbon upper and silicon carbide-to-ceramic lower seal faces. A patented centrifugal oil lifter forcibly circulates lubricant across the seal faces.
Motor safety is provided by a circle thermal protector that directly opens the motor circuit during excessive heat or overcurrent events. Power is supplied through a 6-meter PVC cabtyre cable which features Tsurumi's anti-wicking entry block to prevent water migration. This free-standing model can be adapted to guide rails using the optional TOK4-A system.
FEATURES
- Cast iron semi-open multi-vane impeller designed for reliable light solids passage up to 11mm size.
- Tsurumi Tsurumi Oil Lifter device that stabilizes double mechanical seal cooling and prevents dry running.
- Waterproof cable connection incorporating an epoxy-resin anti-wicking block that halts capillary fluid transport.
- Permanently lubricated; double-shielded C3 ball bearings to support continuous operation and low noise.
- High-tensile 420 stainless steel motor shaft and gray cast iron motor frame for long-lasting alignment.
- Dry-type subsea induction motor rated under IP68 protection class with high-grade winding insulation.
- Threaded oval flange discharge connection with 50 mm discharge bore size for direct piping attachment.
FAQs
General Product FAQs
1. How do I choose the right pump for my setup?
Selecting the correct pump depends on your required flow (L/min), total head (vertical lift + friction loss), and power source. If you're unsure, contact our team and we’ll size the right system for you.
2. Do you offer support with system design or setup?
Yes — we provide expert advice to help you choose, install, and optimise your pump system. Whether it's a simple setup or a custom solution, we’re here to help.
3. Do you offer complete pump solutions or just products?
We don’t just sell pumps — we provide complete solutions. From accessories and control systems to full packaged setups, we can supply everything required to get your system running efficiently.
Shipping & Availability
1. Do you offer Australia-wide shipping?
Yes — we ship across Australia. Bulk or oversized orders may incur additional freight charges otherwise we offer free shipping over $100*
2. How long does delivery take?
Orders are typically shipped within 1–2 business days, with delivery taking approximately 2–7 days depending on your location.
3. What courier or freight companies do you use?
We work with a range of trusted carriers including Australia Post, StarTrack, TNT, and other national freight providers depending on the size and location of your order. This allows us to ensure fast, reliable delivery across Australia, including regional and remote areas.
Warranty & Support
1. Do your pumps come with a warranty?
Yes — all products are backed by manufacturer warranties. Warranty periods vary depending on the brand and product type.
2. What support do you offer after purchase?
We provide ongoing support including:
- Installation advice
- Troubleshooting
- Spare parts supply
- System upgrades
3. What is the warranty process if something goes wrong?
If you experience an issue, simply contact our team with your order details and a description of the problem. We’ll guide you through troubleshooting and, if required, arrange repair, replacement, or manufacturer assessment in line with warranty terms.
Why choose Foundation Pumps?
1. Why choose Foundation Pumps over other suppliers?
We focus on supplying proven, high-quality pump solutions backed by real industry knowledge. Unlike general resellers, we understand how these systems perform in the field and provide honest, practical advice to ensure you get the right solution the first time.
2. Do you offer expert advice before and after purchase?
Yes — we support you at every stage, from selecting the right pump through to installation and ongoing use. Our team is available to assist with sizing, troubleshooting, and system optimisation whenever you need it.
3. Do you stock trusted brands and quality products?
We carefully select and supply pumps from reputable manufacturers known for reliability and performance. Our range includes both industry-leading brands and high-value alternatives that meet Australian standards and conditions.
Can’t find your answer?
Recently viewed
Last seen items
Search
You May Like
- Choosing a selection results in a full page refresh.
- Opens in a new window.