Waterco Electroheat PRO 60kW Inverter Heat Pump for Aquatic Center Heating with Inverter Compressor Control

Addressing continuous commercial aquatic heating loads requires advanced dynamic thermal management. The Waterco Electroheat PRO 60kW provides highly precise temperature regulation for heavily utilized pool environments. Driven by sophisticated variable-speed technology, it entirely eliminates harsh start-up voltage spikes. Operating strictly on a robust Three-phase 415v electrical supply, this system guarantees optimized energy utilization across extended swimming seasons without complex facility power overhauls.

Delivering targeted output, it produces a peak Heating Capacity 60.0 kW while maintaining an efficient maximum Power Consumption 7.50 kW. This thermodynamic balance yields an impressive COP 15.1 at modulated lower speeds, significantly lowering utility overhead. The hydraulic circuit manages a Max Flow approximately 400 L/Min, connecting to plumbing via Port Size 65 mm slip fittings to minimize manifold backpressure.

Environmental resilience is fundamental, allowing reliable functionality across an extreme ambient window from -20 °C to +43 °C. During intense cold, a sensor automatically initiates a hot gas de-icing protocol, reversing the R32 refrigerant flow to melt frost. This protective cycle ensures latent atmospheric heat extraction never stalls.

Structural longevity is secured by an aluminium alloy cabinet that dampens acoustic resonance. The exchange occurs inside a twisted titanium heat exchanger, acting as an absolute barrier against internal corrosion. This configuration provides complete immunity to aggressive saline loops and heavy chlorine exposure.

• Equipped with an intuitive touch control panel integrating built-in WIFI connectivity for remote facility climate adjustments.
• Twin aerodynamic horizontal fans move massive ambient air volumes while generating a minimal operational noise emission of fifty-nine decibels.
• Constructed with a specialized hydrophilic blue fin dipped evaporator surface to drastically enhance thermal absorption from surrounding humidity.
• Features a ten horsepower Mitsubishi direct current inverter compressor that significantly reduces physical shaking transferring into the pad.
• Incorporates an internal electronic flow switch mechanism designed to automatically protect vital components from operating during dry pipe conditions.
• Overall unit weight of two hundred and seventeen kilograms stabilizes the chassis against high wind environments and external mechanical impacts.

Backed by a comprehensive warranty featuring a domestic provision of 7 years on the titanium heat exchanger, 7 years on the compressor, 5 years on all other components, and 1 year labor, alongside a commercial coverage of 1 year for labor and parts.