You may also like
Processing lines and plant room machinery rely on cool-running, low-vibration electric drives to minimize mechanical bearing fatigue and electricity demand. Built around an aerodynamically finned flake cast iron frame, this four-pole high-efficiency motor directs cooling air evenly across the drive housing and top terminal box.
Rated for 2.2 kW or 3.0 HP output at 415V 50 Hz, the rotor operates at 1440 rpm full load while drawing just 4.56 A and maintaining 87.2 percent IE3 high efficiency. Strong 14.7 Nm nominal shaft torque combines with 3.5 times locked-rotor torque and 3.4 times breakdown torque to accelerate inertial loads cleanly.
Electrical windings feature WEG Insulation System Evolution wire with Class H standard thermal insulation and conservative Class B 80K temperature rise to withstand VFD switching voltage spikes safely. An AISI 1040/45 steel 28j6 x 60 mm keyed drive shaft spins on pre-lubricated 6206 ZZ and 6205 ZZ ball bearings inside standard IP66 housings.
Integral cast iron mounting feet conform to IEC 100L B3 standard centers alongside a standard green industrial coating and aluminum cooling fan. Weighing 31.5 kg with a quiet 53.0 dB no-load acoustic profile, the top-mounted terminal box rotates cleanly to match incoming plant conduit entries.
FEATURES
- Rated 2.2 kW or 3.0 HP output at 1440 rpm on 415V three-phase 50 Hz electrical mains
- Draws 4.56 A full load current with 7.8 times locked rotor current and 0.77 power factor
- IE3 high-efficiency rating of 87.2 percent at full load reduces plant electrical consumption
- Delivers 14.7 Nm nominal torque with 3.5x starting torque and 3.4x breakdown torque
- IP66 standard ingress rating with closed drain plugs protects windings against water jets
- Pre-lubricated 6206 ZZ and 6205 ZZ bearings paired with 28j6 x 60 mm AISI 1040/45 steel shaft
- FC-200 cast iron housing, endshields, and top terminal box with integral B3 mounting feet
- Class H standard insulation with 80K temperature rise and WISE VFD-ready stator wire
- Low 53.0 dB no-load sound level, standard green finish, and balanced 31.5 kg frame mass
- Backed by official WEG manufacturer warranty subject to compliant overload relay protection, sealed cable glands, and installation guidelines
Recently viewed
Last seen items










