You may also like
Open-cut mine dewatering skids, mineral crushers, and slurry pump bays subject electric motors to abrasive iron ore dust, torrential hosing, and scorching ambient heat. Coated in high-visibility electric orange, this cast iron mining motor shields critical internal bearings behind dual Permatex-sealed joints and an exclusive taconite labyrinth barrier.
Delivering 15 kW or 20 HP at 1475 rpm on 415V 50 Hz power, the Frame 160L drive achieves 92.1 percent IE3 efficiency while drawing 28.0 A at 0.81 power factor. High 97.5 Nm nominal torque pairs with 2.8 times locked-rotor torque and 3.1 times breakdown torque to overcome packed slurry resistance.
Class H 180-degree Celsius winding insulation paired with conservative Class B 80K rise and WISE spike-resistant wire enables +55 degrees Celsius ambient operation per standard W22 Mining specifications. An FC-200 cast iron fan and IK08 cast iron fan cover protect external cooling paths from rock impact.
Regreaseable 6309 C3 and 6209 Z-C3 bearings fitted with DE and NDE zerk nipples support a 42k6 x 110 mm AISI 1040/45 steel shaft at 61.0 dB no-load sound levels. Weighing 140 kg on rigid B3 feet, the electric orange Frame 160L chassis complies with AS 60034 and IEC 60034 standards.
FEATURES
- Delivers 15 kW or 20 HP at 1475 rpm with 92.1 percent IE3 efficiency on 415V 50 Hz mains
- 42k6 x 110 mm AISI 1040/45 keyed shaft controlled to low 61.0 dB no-load sound level
- Impact-resistant FC-200 cast iron fan and IK08 cast iron fan cover withstand rock debris
- Standard W22 Mining rating supports +55 degrees Celsius ambient with 2.8x LRT and 3.1x BDT
- Dedicated W3Seal taconite labyrinth, V-ring, and O-ring system seals bearings to IP66 mining spec
- Finished in high-visibility electric orange over a 140 kg cast iron Frame 160L B3 chassis
- Class H 180-degree Celsius insulation with 80K temperature rise and WISE VFD-ready wire
- Regreaseable 6309 C3 and 6209 Z-C3 bearings fitted with DE and NDE lubrication zerk nipples
- Draws 28.0 A full-load current at 0.81 power factor while generating 97.5 Nm nominal torque
- Backed by official WEG manufacturer warranty subject to compliant thermal overload protection, IP66 gland sealing, and zerk bearing maintenance
Recently viewed
Last seen items










